Thermaltake Toughpower PT 1000W 80+ Platinum PCIe Gen 5.1 ATX 3.1 Fully Modular PSU  

Toughpower SFX Platinum 1000W

Designed for next-generation hardware, the Toughpower SFX Platinum supports the Intel SFX 12V 4.1 and ATX 12V 3.1 standards. Its native, fully modular PCIe 12V-2x6 (12+4-pin) connection supports compatible graphics cards. The series is 80 PLUS Platinum certified and designed for stable, efficient power delivery.

Compact SFX Design

Measuring 125 × 63.5 × 103.8mm (W × H × D), this power supply includes an SFX-to-ATX adapter bracket for compatibility with a wider range of cases.

ATX 3.1 Compatibility

Supports power excursions of up to 200%, low-load efficiency requirements, and ATX 3.1 power supply timing standards.

PCIe Gen 5.1 Ready

The native PCIe 12V-2x6 cable supports compatible next-generation graphics cards and can deliver up to 600W. The wattage marked on the cable indicates the recommended system wattage; actual power needs depend on the components and usage. Follow the graphics card manufacturer’s power requirements when connecting the cable.

Graphics Card Power Connectors

Includes four PCIe 6+2-pin connectors and one PCIe 12V-2x6 connector for compatible graphics cards.

Quiet 90mm Cooling Fan

The 90mm fluid bearing fan provides airflow. Smart Zero Fan mode keeps the fan off until the power supply reaches 30% load to help reduce noise.

80 PLUS Platinum Efficiency

80 PLUS Platinum certified, with efficiency of up to 92% to help reduce energy loss and heat.

Low Ripple Noise

Ripple noise remains below 30mV on the +12V, +5V, and +3.3V rails across 0% to 100% load.

Japanese Capacitors

100% Japanese 105°C electrolytic capacitors are used for durability and stable operation.

Single +12V Rail and DC-to-DC Design

The single +12V rail, LLC topology, and DC-to-DC circuit design provide stable power delivery and voltage regulation.

AC Input

Input voltage: 100–240V~
Input current: 15A–8A
Frequency: 50Hz/60Hz

DC Output

+3.3V: 18A
+5V: 18A
+12V: 83.3A
−12V: 0.3A
+5VSB: 2.5A
Combined +3.3V and +5V output: up to 120W
+12V output: up to 1000W
−12V output: up to 3.6W
+5VSB output: up to 12.5W
Total power: 1000W

Fully Modular Low-Profile Cables

Fully modular, low-profile cables help simplify cable management, reduce clutter, and improve airflow inside the case.

Connectors and Cable Lengths

Main power (24-pin): one connector, one cable, 300mm
ATX 12V (4+4-pin): two connectors, two cables, 400mm each
PCIe (6+2-pin): four connectors, two cables, 400mm + 150mm each
PCIe (12+4-pin, 600W): one connector, one cable, 400mm
SATA (5-pin): eight connectors, two cables, 300mm + 150mm + 150mm + 150mm each
Peripheral (4-pin): four connectors; FDD: one connector, one cable, 300mm + 150mm + 150mm + 150mm + 150mm

Built-In Protection

Protection features include Over Current Protection (OCP), Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP), and Over Temperature Protection (OTP).

Intel C6/C7 States Ready

Optimized to work with Intel processor generations and support C6/C7 low-power states for energy savings.