Arctic Freezer 36 A-RGB Single Tower Dual Fan CPU Cooler - White

Designed for AMD AM4/AM5 and Intel 1700/1851| High Static Pressure A-RGB Fans | Included Intel Contact Frame

Arctic  |  SKU 61279  |  MPN ACFRE00125A
$69.00

Warranty and Support

Warranty: 6 Years Return to Base Warranty

Returns: 14-day hassle-free exchanges and store credits, subject to terms and conditions outlined in our Returns Policy.

Delivery and Shipping

All deliveries are signature required.

North Island: 1 – 2 working days
South Island: 2 – 3 working days

Please allow an additional 1 – 2 working days for delivery to rural addresses.

Buy Now, Pay Later & Finance Options:

Description

High-Class Finish with Aluminium Top Plate

With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

Freezer 36 – Tested and Confirmed by Intel

Intel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF, and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with the contact frame and the cooler's performance.

Future-Proof Compatibility

The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 coolers can be used with the new LGA1851 socket from Intel without limitation.

Improved Fan Mounting

Thanks to the innovative mounting system, both fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.

LGA1851 | LGA1700 Contact Frame

Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE, and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install, and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimized, cooling performance remains consistent, and installation is quick and uncomplicated.

High-Quality Bearing

Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimized. In this way, less heat is generated, less bearing noise is produced, and the service life of the fan is significantly extended.

Optimized Heatsink

The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the PC case through the heatsink. This side-flow design achieves even more efficient ventilation.

P-Fans - High Static Pressure and Impressive Colours

ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronized with the lighting of other hardware.

ARCTIC's partner SignalRGB offers a comprehensive solution for synchronization and individual configuration of the illumination.

Large Selection of Variants

The Freezer 36 is available in five different versions, all equipped with two fans in a push-pull configuration. In addition to the standard model with an aluminium heatsink design, a version with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans.

Specifications

Compatibility Intel: LGA1851 | LGA1700
AMD: AM5 | AM4
PI | NNPI 245 | 219
TIM MX-6 (0.8 g)
Operating Ambient Temperature 0—40 °C
Dimensions 104 (L) x 126 (W) x 159 (H) mm
Weight 917 g
Heatsink Heatpipes: 4x Ø6 mm, Copper
Fin Stack: 59x 0.4 mm, Aluminium
Fans Fan: 2x P12 PWM PST A-RGB
Speed: 200 - 2000 rpm, PWM Controlled (0 rpm below 5 % PWM)
Bearing: Fluid Dynamic Bearing
Current | Voltage: 0.11 A | 12 V DC
Cable Length: 200 mm + 80 mm Splitter Cable
Connector: 4-Pin PWM-Connector + 4-Pin Plug
RGB LEDs: 12x A-RGB LEDs
Current | Voltage: 0.40 A | 5 V DC
Cable Length: 200 mm + 80 mm Splitter Cable
Connector: 3-Pin A-RGB-Connector + 3-Pin Plug