ADT-Link 25CM PCIe 4.0 Right Angle Riser Cable Black Support 4000 Series Video Card

=Supports Nvidia New 40 Series Graphics Card at PCIE4.0=

(Tested in-house by Computer Lounge technicians for compatibility with up to RTX 4000 Series graphics cards at high performance)

Speed ​​Bandwidth: PCIe 4.0 x16

Compatible motherboard: PCIe4.0 motherboard

Metal Layer Shielding

Advanced EMI shielding conductive polymer, new material for EMI shielding, flat cable design. This technology allows each cable to be completely covered by an EMI shield of conductive polymer to prevent incoming or outgoing emissions of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable.

Cable Length

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the blue arrow in the picture.

New Generation Wires

The cable is the fourth-generation PCIe dedicated cable independently developed and designed by ADT. The thickness of the black cable is 1.3mm, and the thickness of the silver cable is 1.4mm. The cable can be bent or folded without affecting the use.

Product advantages

• Cable advantages, the fourth generation of shielded high-speed cables developed by ADT, using high-quality connectors, high-frequency support PCIe 4.0 x1 8G/bps stable transmission
• The advantage of the cable length is that it can be customized from 3 cm to 1 meter. The patch cables sold in this shop have low impedance. The cable length within 60 cm can stably support PCIe4.0 full speed.
• The differential signal has no via design, there is no signal attenuation interference problem caused by parasitic capacitance and parasitic inductance, and there will be no CAF micro-short circuit phenomenon, and the product is durable.
• The PCB is made of high-frequency and low-resistance high-quality materials. The workmanship of the PCB is precise. The PCB uses a high TG plate. The thickness of the copper material is thickened to 1oz. crash sound problem.
• The wire used in the product itself is very durable. The metal soldering point is protected by a PCB gasket with a thickness of 3mm, and it is fastened with screws and hexagonal nuts. The product is strong, reliable, pull-resistant, anti-interference, and there will be no disconnection Nail problem.
• PCB dwarf and fatter design, dwarfing will not get stuck on the graphics card, fatter and longer design makes the board easier to install and reduces the chance of damage