Wooting 80HE TKL Wired Gaming Keyboard - Lekker Linear60 v2 Switch - Ghost
Warranty and Support
Warranty and Support
Warranty: 1 Year Return to Base Warranty
Returns: 14-day hassle-free exchanges and store credits, subject to terms and conditions outlined in our Returns Policy.
Delivery and Shipping
Delivery and Shipping
All deliveries are signature required.
North Island: 1 – 2 working days
South Island: 2 – 3 working days
Please allow an additional 1 – 2 working days for delivery to rural addresses.
Buy Now, Pay Later & Finance Options:
Description
Description
Meet the 80HE
Everything you'd expect from Wooting in an 80% layout. We’ve applied everything we’ve learned so far, making the 80HE our most complete keyboard yet. With several new elements improving the sound, adding new features that enhance your gaming performance and implementing true 8kHz polling to make it our fastest keyboard to date.
Analog Input Unleashed
Full range switch motion. The Wooting 80HE detects full switch motion with 0.1mm accuracy from start to end. Every single key outputs an analog signal that can be used for numerous features that enhances your typing and gaming experience.
There is no compromise to be made in what a regular ol’ keyboard might have to offer. Welcome to the future.
True 8kHz Polling Rate
0.125ms Latency. The 80HE supports up to 8kHz USB polling while also scanning every analog key position at that same rate, providing you with a True 8kHz polling experience. This lowers your keyboard latency to only 0.125ms.
Adjustable Actuation
A pretty ""sensitive"" subject. Eliminate the slowest element in input latency; the initial key press travel before key activation. You have full control over your actuation point from 0.1 to 4.0mm. Configurable per key in 0.1mm steps, you can customize each key towards your playstyle.
Rapid Trigger
Unmatched performance. Eliminate the second slowest element in input latency; return key press travel before key deactivation. Rapid Trigger dynamically changes the actuation and deactivation point. Your keys will activate when you intend to press them and deactivate when you intend to let go. You can repeat a key press mid motion without needing to surpass a fixed reset or actuation point for rapid presses.
Rappy Snappy
We first brought you Rapid Trigger, now we bring you Rappy Snappy pat. pending. Rappy Snappy monitors at least 2 selected keys and activates the key pressed the furthest. When combined with Rapid Trigger, it'll compare the keys only when in an active state, allowing pre-pressing and faster activation on opposite key release. When both are active at the same depth, it'll resort to your selected SOCD resolution. This enhances your (counter) strafing, bunny hopping, and block/parry/combo timing in various games.
Gameplay Benefits
Discover how Wooting provides you with an edge while playing your favorite game.
Gasket Mount
Less noise, softer feel. The PCBA and switch plate are held together by a silicone gasket. This absorbs impact, resulting in less noise and a softer feel when you type.
PC Plate
Softer sound, more flex. The PC plastic switch plate softens the overall typing experience by muting more of the higher frequencies and placing an emphasis on ""thock"".
Screw-in Stabilizers
Eliminate rattle. The Wooting 80HE is equipped with screw-in stabilizers to eliminate rattle. They’re also replaceable with most third-party screw-in and clip-in stabilizers.
Sounds Good?
Experience the sound of the Wooting 80HE for yourself. The stock 80HE sound profile is aimed at low volume with a ‘thock’, while providing snappy typing feedback. You can change the sound with different switches and keycaps without needing to mod anything.
A LED Bar
With a little twist. One bar, ten squares, a thousand ways to communicate with you. This is your 80HE talking in abstract about what you need to know. From profiles to active Rappy Snappy, or just let it blend, and give your 80HE character.
Per-key RGB
Make it yours. Per-key configurable RGB, various (analog) RGB effects, and super bright illumination. Turn them off or customize as you like.
Wooting Lekker Switch V2
Less wobble, superior sound. A contactless magnet switch powered by Hall effect sensors. No metal leaf, pins, optics or other sensitive hardware that suffers from wear, tear, and particles. This lasts millions of presses.
Lekker L45: 30cN key start force, 45cN key end force
Lekker L60
Ergonomics
Made to reduce strain and fatigue. We design our keyboards to have the lowest possible front height with the lowest possible angle to help reduce strain and slow down muscle fatigue. Depending on your hand size, you can change the angle using the interchangeable silicone feet:
- 2.8° Angle
- 6° Angle
- 10° Angle
80HE Module
Get the Wooting 80HE Module without switches or keycaps. Customize your 80HE with your favorite switches, keycaps, and case color.
Our Keycaps
Quality at your fingertips:
- Double Shot PBT – OEM profile, seamless backlit legends.
- Dye Sub PBT – Thick cherry profile, seamless legends imbued through dye-sublimation.
- ABS – UV-coated, OEM profile, laser-etched backlit legends.
Wootility
Fast. Accessible. Intuitive. No software required in the background; all features work straight from the keyboard. Available on Windows, macOS, Linux, or in your browser.
Remap Any Key
Map each key as you see fit across multiple layers and profiles. Full control over your productive workflow.
Advanced Keys
Set advanced keys like mod tap, DKS, and toggle keys to increase efficiency and uncover peak productivity.
Sustainability
Top and bottom cases are made of 65% PCR ABS plastics. Zinc alloy cases are infinitely recyclable. Packaging uses FSC certified cardboard and compostable ""plastic"" bags.
Specifications
Specifications
| Switches | Lekker L60 V2 |
| Keycaps | PBT, ABS and Dye sub options available |
| Case | PCR ABS or Zinc alloy |
| Stabilizers | Screw-in stabilizer |
| Switch plate | White polycarbonate (PC) plate |
| Sandwich pad | Silicone |
| PCBA | Wooting 80HE |
| Cable | 2 meter USB-C to C nylon braided cable |
| Dimensions | 346 x 142mm | 13.6 x 5.6 inch 19.4mm (H) front case height, no keycap 28.4mm (H) front height with OEM keycap |
| Weight | PCR ABS: 790 grams Zinc alloy: 2160 grams |
| Compatibility | Lekker switches, Gateron KS-20 switches Screw-in stabilizer Top & bottom case (gasket mount) |
| What is inside the box | 1x Wooting 80HE 1x Switch & keycap puller 3x Spare L60 switches | 1x Spare L45 Switch 1x USB cable C to C 1x USB C to A dongle 2x 6 degree foot 2x 10 degree foot 4x M2x5 Spare screws 7x Additional keycaps: Home, End, Scrl Lk, A1, A2, A3, Wooting logo key 1x Post card <3 |




