Asetek SimSports Invicta S 27Nm Direct Drive Formula Bundle

Asetek SimSports Invicta™ S-Series Brake & Throttle

The Invicta™ S-Series Brake and Throttle are the hydraulic top tier Invicta™ pedals, as you know them – just separated.

This version of the Invicta™ Sim Racing Pedals allows you to decide and adjust the distance between the throttle and brake up to 100mm apart. This feature gives you the opportunity to design your sim racing setup to suit your exact preferences, even enabling you to mount the pedals inverted. Connectible by using just a single cable.

The Invicta™ S-Series Brake and Throttle are high-end pedals designed with a real racecar feel, durability, and ease-of-use in mind. If you’re using the Asetek SimSports RaceHub™ software, the sim racing pedals are plug’n’play out of the box, and you can adjust them perfectly to your needs in no time.

T.H.O.R.P.™ (Twin Hydraulic Opposing Rapid Pistons) is Asetek SimSports’ hydraulic brake cylinder, giving the racer the ultimate experience of driving a real racecar. The entire set of pedals are, in every sense, “Made in Denmark” – Designed, engineered, and assembled in Denmark. The brake cylinder features an automotive-grade pressure sensor, which makes it the closest you will come to a realistic brake experience in sim racing.

Asetek SimSports Invicta 27nm Direct Drive Wheel Base 

When we set out to develop our range of direct drive wheelbases, we wanted to develop the best sim racing wheelbases on the market measured on all parameters but without breaking the bank. We had greater aspirations than just reselling a standard industrial servo motor and then trying to adapt everything else around it. It was a tough task but like with our award-winning pedals and steering wheels, we started from a clean sheet.

We bought and implemented IP from market-leading vendors, we teamed up with Mige, a well-known motor supplier to sim racing, and after years of development of grounds-up electronics, software, firmware, mechanics, cooperation, design, test, and validation, we are now ready! Please meet the Invicta™ 27Nm, the 18Nm Forte®, and the 12Nm upgradeable La Prima™ wheelbases.

True to the spirit of our other products, at Asetek SimSports®, you will get the same quality, durability, engineering excellence – and most importantly – the same user experience, independent of whether you buy our entry-level La Prima™ series or our top-tier Invicta™ products. Each wheelbase from 12-27Nm features a high-end 22-bit encoder, slipring, and electronics providing an unrivaled driving experience, leaving cogging and lagging in ancient history. All vital parts are of course made of aluminum and steel.

All Asetek SimSports® wheelbases provide smooth, super responsive, and precise feedback to the driver, where you will feel even the smallest bumps and curbs on the road. As an example - each of our wheelbases has a resolution of 0,000085 degrees or roughly 4.000.000 steps in just one revolution of the wheel! In other words, with an Asetek SimSports® wheelbase, you do not have to choose between a true high-fidelity driver experience and a low price. You can get it all!

Asetek SimSports Forte Formula Steering Wheel

Inspired by real-life formula cars, the Asetek SimSports® Forte® Formula Steering Wheel has been thoroughly designed by racers and sim racers alike. The steering wheel has been designed and engineered to live up to the feeling of real-life racing at the same time as adopting sim racing feedback. With this and other feedback in mind, we started from ground up and a clean sheet of paper on a mission to create the best possible sim racing formula wheel, but like our other products, without breaking the bank. We are pleased to say that we achieved just that – please meet the Forte® Formula steering wheel!

Many wheels, sim racing or real-life racing, get their strength and rigidity from the front face plate and the handles, oftentimes in a closed construction (handlebars are in mechanical connection in both ends). Unfortunately, that also makes them locked in size and design. To achieve maximum stiffness and at the same time allowing you, the user, to easily change the handles, add clutches, DRS paddles. we use an injection molded chassis with a carbon, glass and plastic composite material providing a very high natural rigidity and strength and featuring a laser etched forged carbon exterior whilst not relying on the handlebars to provide strength and stiffness.

To add to the overall anti-flex and a proper interface to the removable handles, the chassis features a metal spider interface inside and altogether it yields a stiff, non-flexing steering wheel where the handles can be changed and or upgraded over time to help give you the steering wheel YOU want! For now, we have two different sizes, the default giving a perfect fit and grip for average size hands and an XL version for larger hands.

The ergonomic handles are made in a comfortable, soft and durable silicone rubber, that is easy to clean and disinfect and will give you ultimate comfort and control, regardless of whether you are wearing racing gloves or not. You will have the option to easily change the handles to quickly implement future upgrades to color, size, shape and hardness.